iimveliso

Ilaphu le-Fiberglass Multiaxial le-E-Glass

Umfanekiso oBonisiweyo weFayibha yeGlasi ye-E-Glass Multiaxial Fabric

inkcazo emfutshane:

Ilaphu leFiberglass Multiaxialziquka iiFabrics ze-Uni-Directional, Biaxial, Triaxial kunye ne-Quadraxial. Zonke ii-Partial warp.weft kunye ne-double bias plies zithungelwa kwilaphu elinye. Nge-ou filament crimp kwi-loven roving, iifabrics ze-Multiaxial ziluncedo ngokuba namandla aphezulu, ukuqina okugqwesileyo, ubunzima obuphantsi kunye nobukhulu, kunye nomgangatho ophuculweyo welaphu. Iifabrics zinokudityaniswa ne-strand mat eqoshiweyo okanye i-tissue okanye izinto ezingezizo ezolukiweyo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

IMPAHLA

• Amandla aphezulu: Ilaphu le-fiberglass multiaxial linokumelana nemithwalo ephezulu kwaye libonelele ngokuqina kwesakhiwo.
• Ukuqinisa: Eli laphu longeza ukuqina kwaye liphucula iimpawu zoomatshini zemveliso yokugqibela.
• Ukujongwa kwefayibha ngeendlela ezininzi: Ilaphu lenza kube namandla kwiindlela ezahlukeneyo, libonelela ngezakhono zokuthwala umthwalo eziphuculweyo.
• Ukuphathwa lula kunye nokubekwa kwelaphu: Ilaphu le-fiberglass multiaxial kulula ukuliphatha kunye nokubekwa kwelaphu ngenxa yendalo yalo eguquguqukayo.
• Ukuphucula ukumelana nempembelelo: Ukuqina kwelaphu le-fiberglass multiaxial kunceda ukuphucula ukumelana nempembelelo xa kuthelekiswa nezinto ezisebenza kwicala elinye.
• Uzinzo lobushushu: Ilaphu le-fiberglass multiaxial linokugcina ukuthembeka nokusebenza kwalo phantsi kweemeko zobushushu obuphezulu.

ISICELO

Into	Inkcazo
Ilaphu Elibhekisa Kwicala Elinye (0° okanye 90°)	Ubunzima buqala kwi-4 oz/yd² (malunga ne-135 g/m²) kwaye bunyuke bufike kwi-20 oz/yd² (malunga ne-678 g/m²) nangaphezulu.
Ilaphu leBiaxial (0°/90° okanye ±45°)	Ubunzima buqala kwi-16 oz/yd² (malunga ne-542 g/m²) ukuya kwi-32 oz/yd² (malunga ne-1086 g/m²) okanye nangaphezulu.
Ilaphu le-Triaxial (0°/+45°/-45°) / (+45°/+90°/-45°)	Ubunzima obuqala kwi-20 oz/yd² (malunga ne-678 g/m²) bufikelele kwi-40 oz/yd² (malunga ne-1356 g/m²) nangaphezulu.
Ilaphu le-Quadraxial (0°/+45°/90°/-45°)	Ilaphu le-quadraxial linamaleya amane eefayibha ezijonge kwii-engile ezahlukeneyo (ezidla ngokuba yi-0°, 90°, +45°, kunye ne--45°) ukuze zinike amandla kunye nokuqina kwiindlela ezahlukeneyo. Ziqala kwi-20 oz/yd² (malunga ne-678 g/m²) kwaye zinyuke ziye kwi-40 oz/yd² (malunga ne-1356 g/m²) nangaphezulu.

Isaziso: Ngasentla kukho iinkcukacha ezisemgangathweni, ezinye iinkcukacha ezenzelwe wena eziza kuxoxwa ngazo.

ISICELO

Ukubeka ngesandla, ukujija intambo, i-pultrusion, i-continuous laminating kunye nee-closed moulds. Ukusetyenziswa okuqhelekileyo kufumaneka ekwakhiweni kweenqanawa, ekuthuthweni, ekuthinteleni ukugqwala, kwiinxalenye zeenqwelo-moya nakwiimoto, kwifenitshala nakwizakhiwo zemidlalo.

Iiworkshops

UKUPAKISHA NOKUGCINA

Iimveliso ezilukiweyo ezijikelezayo mazigcinwe kwindawo epholileyo neyomileyo. Ubushushu obucetyiswayo buphakathi kwe-10 kunye ne-35 °C, kunye nomswakama ophakathi kwe-35 kunye ne-75%. Ukuba imveliso igcinwe kubushushu obuphantsi (ngaphantsi kwe-15 °C), kucetyiswa ukuba izinto ezisetyenzisiweyo zibekwe kwindawo yokusebenzela ubuncinane iiyure ezingama-24 ngaphambi kokuba zisetyenziswe.

Ukupakishwa kwePallet

Ipakishwe kwiibhokisi/iingxowa ezilukiweyo

Ubungakanani bePallet: 960 × 1300

Phawula

Ukuba ubushushu bokugcina bungaphantsi kwe-15°C, kuyacetyiswa ukuba iipalethi zibekwe kwindawo yokucubungula iiyure ezingama-24 ngaphambi kokuba zisetyenziswe. Oku kukuthintela ukufuma. Kucetyiswa ukuba iimveliso zisetyenziswe kusetyenziswa indlela yokuqala yokungena, yokuqala ukuphuma zingadlulanga iinyanga ezili-12 emva kokuhanjiswa.

Ngaphambili: Umthengisi we-fiberglass mat othungiweyo wefektri uthengisa ngokuthe ngqo

Okulandelayo: Iipali zeentente zeFiberglass Amandla aphezulu

Imvelisoiindidi

Uphando lwePricelist

Ukuba unemibuzo malunga neemveliso zethu okanye uluhlu lwamaxabiso, nceda usishiyele i-imeyile yakho kwaye siya kuqhagamshelana nathi kwiiyure ezingama-24.